How To Change Daytime Running Light On 2018 Jeep Compass
With its sleek design and impressive performance, the 2018 Jeep Compass is a vehicle that demands attention on the road. One feature that adds to its bold presence is the daytime running lights. If you find yourself needing to replace the DRL on your Jeep Compass, fear not! In this article, we will guide you through the steps on how to change the daytime running light on a 2018 Jeep Compass. Let’s get started!
Table of Contents
- Introduction
- Locating the Daytime Running Light on a 2018 Jeep Compass
- Tools Required for Changing the Daytime Running Light
- Step-by-Step Guide to Changing the Daytime Running Light
- Testing the New Daytime Running Light
- Additional Tips for Maintenance and Replacement
- Frequently Asked Questions
- Wrapping Up
Introduction
To change the daytime running light on your 2018 Jeep Compass, you will need to follow a few simple steps. First, make sure you have the new daytime running light bulb ready for installation. You can purchase the replacement bulb at your local auto parts store or online.
Next, locate the daytime running light assembly on your Jeep Compass. The daytime running light is typically located on the front bumper or near the headlights. Use your owner’s manual for guidance if needed. Once you have located the assembly, you can proceed with changing the bulb.
Carefully remove the old daytime running light bulb from the assembly by twisting it counterclockwise. Once the old bulb is removed, insert the new daytime running light bulb into the assembly and twist it clockwise to secure it in place. Make sure the bulb is securely in place before testing the new daytime running light.
Locating the Daytime Running Light on a 2018 Jeep Compass
To locate the daytime running light on a 2018 Jeep Compass, you will need to access the front bumper of the vehicle. The daytime running light is typically located near the headlights, either above or below them. You may need to remove a cover or panel to access the light, depending on the specific design of your Jeep Compass.
Once you have located the daytime running light, you can proceed with changing it. To replace the light bulb, follow these steps:
- Turn off the engine and open the hood of the vehicle for better access.
- Locate the back of the daytime running light and twist the socket counterclockwise to remove it.
- Remove the old light bulb and insert the new one, making sure it is securely in place.
- Twist the socket clockwise to reattach it, and test the new light bulb to ensure it is functioning properly.
If you prefer, you can also consult the owner’s manual of your 2018 Jeep Compass for specific instructions on how to change the daytime running light. Remember to always handle the light bulb carefully to avoid damage and ensure a successful replacement.
Tools Required for Changing the Daytime Running Light
To change the daytime running light on a 2018 Jeep Compass, you will need a few tools to help you get the job done efficiently. Here is a list of the tools required:
- Flathead screwdriver
- Socket wrench set
- Replacement daytime running light bulb
Before you begin the process of changing the daytime running light, make sure you have all the necessary tools at hand. The flathead screwdriver will help you remove any screws or clips holding the light in place. The socket wrench set will be used to access and replace the old bulb with the new one. And of course, don’t forget the replacement daytime running light bulb itself!
Once you have gathered all the required tools, you can proceed with changing the daytime running light on your 2018 Jeep Compass. Use the flathead screwdriver to carefully remove any screws or clips securing the light in place. Then, use the socket wrench set to access the old bulb and replace it with the new one. Make sure to test the new bulb to ensure it is working properly before reassembling the light. With these simple steps and the right tools, you’ll have your daytime running light changed in no time.
Step-by-Step Guide to Changing the Daytime Running Light
To change the daytime running light on your 2018 Jeep Compass, you will need to follow these step-by-step instructions. Before beginning, make sure you have the necessary tools such as a screwdriver, replacement bulb, and gloves for safety.
First, locate the back of the headlight assembly where the daytime running light is located. Using a screwdriver, carefully remove the screws holding the cover in place. Once the cover is off, you will see the bulb socket. Twist the socket counterclockwise to remove it from the assembly.
Next, carefully remove the old bulb from the socket and replace it with the new daytime running light bulb. Make sure it is securely in place before reattaching the socket to the headlight assembly. Once the new bulb is installed, carefully put the cover back on and secure it with the screws. Test the new daytime running light to ensure it is working properly.
Testing the New Daytime Running Light
To change the daytime running light on your 2018 Jeep Compass, follow these simple steps:
First, locate the daytime running light housing on the front of your vehicle. This is usually near the headlights and may require you to pop the hood to access it.
Next, carefully remove the old daytime running light bulb by turning it counterclockwise until it loosens. Pull the bulb out gently, making sure not to break it. Dispose of the old bulb properly.
Insert the new daytime running light bulb into the housing, making sure it is securely in place. Turn the bulb clockwise until it is tight. Test the new bulb to ensure it is functioning correctly. If all looks good, you’re all set to hit the road with your new daytime running light!
Additional Tips for Maintenance and Replacement
To effectively change the daytime running light on your 2018 Jeep Compass, it is important to follow these :
-
Inspect the Surrounding Area: Before beginning the replacement process, make sure to inspect the surrounding area of the daytime running light. Look for any signs of damage or wear that may require additional repairs.
-
Use Proper Tools: It is essential to use the correct tools for replacing the daytime running light on your Jeep Compass. Ensure you have the appropriate screwdrivers and sockets to safely remove and install the new light.
-
Check for Compatibility: Before purchasing a replacement daytime running light, double-check to ensure it is compatible with your specific Jeep Compass model year. Installing a light that is not compatible can lead to electrical issues or malfunctions.
By following these maintenance and replacement tips, you can successfully change the daytime running light on your 2018 Jeep Compass and ensure optimal performance on the road. Remember to exercise caution and refer to your vehicle’s manual for further guidance.
Frequently Asked Questions
Q: What tools are needed to change the daytime running light on a 2018 Jeep Compass?
A: To change the daytime running light on a 2018 Jeep Compass, you will need a flathead screwdriver and a replacement bulb.
Q: Where is the daytime running light located on the 2018 Jeep Compass?
A: The daytime running light on the 2018 Jeep Compass is located in the front bumper, near the headlights.
Q: How do I access the daytime running light on my Jeep Compass?
A: To access the daytime running light on your Jeep Compass, you will need to remove the front bumper by removing the screws and clips holding it in place.
Q: Can I change the daytime running light on my Jeep Compass myself, or should I take it to a professional?
A: Changing the daytime running light on your Jeep Compass is a relatively simple process that can be done at home. However, if you are not comfortable working on your car, it is always best to consult a professional.
Q: What are some common signs that my daytime running light needs to be replaced?
A: Some common signs that your daytime running light needs to be replaced include dimming or flickering light, or a completely non-functional light.
Q: Are there any specific steps I need to follow to change the daytime running light on my Jeep Compass?
A: Yes, there are specific steps you should follow to change the daytime running light on your Jeep Compass. Make sure to disconnect the battery before starting any work, and refer to your owner’s manual for detailed instructions.
Wrapping Up
changing the daytime running light on your 2018 Jeep Compass is a simple task that can easily be done at home with the right tools and knowledge. By following the step-by-step guide outlined in this article, you can ensure that your vehicle is safe and road-ready. Remember to always prioritize safety and take your time when working on your car. Thank you for reading and happy driving!