How To Jump Start 2018 Jeep Compass
The 2018 Jeep Compass is a rugged and reliable vehicle, built to take on any adventure that comes its way. However, even the most reliable vehicles can sometimes run into a little trouble. If you find yourself with a dead battery in your 2018 Jeep Compass, fear not! With a few simple steps, you can easily jump start your vehicle and get back on the road in no time. In this article, we will guide you through the process of jump starting your 2018 Jeep Compass, ensuring that you are prepared for any situation that may arise.
Table of Contents
- Preparing for Jump Starting
- Locating the Battery and Terminals
- Connecting the Jumper Cables Correctly
- Starting the Dead Battery Vehicle
- Charging the Battery after Jump Start
- Preventative Measures for Future Issues
- Frequently Asked Questions
- Closing Remarks
Preparing for Jump Starting
To properly prepare for jump starting your 2018 Jeep Compass, follow these steps:
Check the Battery:
– Make sure the battery terminals are clean and free of corrosion.
– Verify that the battery cables are securely connected.
– Test the battery with a voltmeter to ensure it has enough charge.
Gather Equipment:
– Find a set of jumper cables that are in good condition.
– Locate a functioning vehicle to use for jump starting.
– Keep safety equipment such as gloves and safety glasses handy.
Follow Safety Precautions:
– Park both vehicles in a safe, flat area away from traffic.
– Turn off the ignition and all electrical components in both vehicles.
– Consult your vehicle’s owner’s manual for any specific jump starting instructions.
Warning | Tip |
---|---|
Never smoke or use open flames when jump starting a vehicle. | It’s a good idea to have a set of booster cables in your car at all times. |
Locating the Battery and Terminals
To jump start your 2018 Jeep Compass, first, you need to locate the battery and terminals. The battery is typically located under the hood of the vehicle. Look for a rectangular or square-shaped box with two cables connected to it. The positive terminal is usually marked with a plus sign (+) and is typically red. The negative terminal is typically marked with a minus sign (-) and is usually black.
Before attempting to jump start your Jeep Compass, make sure both vehicles are turned off and the keys are removed from the ignition. Also, ensure that the jumper cables are in good condition and not damaged. It’s important to follow the correct sequence when connecting the jumper cables to avoid damaging the vehicles’ electrical systems. Here’s a step-by-step guide on how to jump start your 2018 Jeep Compass:
- Place the vehicles close enough to each other so that the jumper cables can reach both batteries.
- Connect one end of the red (positive) jumper cable to the positive terminal on the dead battery.
- Connect the other end of the red (positive) jumper cable to the positive terminal on the working battery.
- Connect one end of the black (negative) jumper cable to the negative terminal on the working battery.
- Connect the other end of the black (negative) jumper cable to a metal surface on the engine block of the dead vehicle (not directly to the negative terminal).
- Start the working vehicle and let it run for a few minutes to charge the dead battery.
- Try starting the dead vehicle. If it starts, carefully remove the jumper cables in the reverse order that they were connected.
- If the dead vehicle still doesn’t start, you may need to contact a professional for assistance.
Connecting the Jumper Cables Correctly
When it comes to jump starting a 2018 Jeep Compass, it’s crucial to connect the jumper cables correctly to avoid any damage to the vehicle. Follow these steps to ensure a successful jump start:
First, park the donor vehicle next to your Jeep Compass so the jumper cables can reach both batteries. Make sure both cars are turned off before proceeding.
Next, follow the steps below to connect the jumper cables correctly:
- Step 1: Attach one end of the red jumper cable to the positive terminal of the dead battery.
- Step 2: Connect the other end of the red cable to the positive terminal of the donor vehicle’s battery.
- Step 3: Attach one end of the black jumper cable to the negative terminal of the donor vehicle’s battery.
- Step 4: Lastly, connect the other end of the black cable to an unpainted metal surface on your Jeep Compass, away from the battery.
Starting the Dead Battery Vehicle
To jump start a 2018 Jeep Compass with a dead battery, follow these steps:
-
Locate the batteries: Park the booster vehicle close to the dead vehicle, ensuring the engine bays are facing each other. Identify the positive and negative terminals on both batteries.
-
Connect the jumper cables: First, connect the red cable to the positive terminal of the dead battery, then connect the other end to the positive terminal of the booster vehicle’s battery. Next, connect the black cable to the negative terminal of the booster vehicle’s battery, and then attach the other end to an unpainted metal surface on the dead vehicle, away from the battery.
-
Start the dead vehicle: Allow the booster vehicle to run for a few minutes, then try starting the dead vehicle. Once it starts, let both vehicles run for a few more minutes before disconnecting the cables in the reverse order. Remember to drive the newly started vehicle around to ensure the battery recharges.
Here is a simple guide to jumping a car:
Step | Instruction |
---|---|
1. | Identify battery terminals |
2. | Connect red cable to positive |
3. | Connect black cable to negative |
4. | Start the booster vehicle |
5. | Start the dead vehicle |
Charging the Battery after Jump Start
To charge the battery after jump-starting your 2018 Jeep Compass, you will need a battery charger or a running vehicle to help recharge the battery. Here are some steps to follow:
-
Connect the battery charger:
- Make sure the charger is turned off before connecting the positive (red) cable to the positive terminal on the battery.
- Next, connect the negative (black) cable to the negative terminal on the battery.
- Plug in the battery charger and set it to the appropriate charging mode for your battery.
-
Charging the battery:
- Allow the battery to charge for the recommended amount of time, typically 4-6 hours.
- Check the battery charger periodically to monitor the charging progress.
- Once the battery is fully charged, disconnect the charger from the battery terminals.
-
Final steps:
- Start the vehicle and ensure that all electrical components are functioning properly.
- If the vehicle starts normally without any issues, the battery is successfully charged.
- It’s always a good idea to drive the vehicle for a while to give the battery a chance to fully recharge while the alternator is running.
Preventative Measures for Future Issues
To jump start a 2018 Jeep Compass, you will need a set of jumper cables and a working vehicle to help provide power. Follow these steps to safely jump start your vehicle:
– Park the working vehicle next to your Jeep Compass, making sure both cars are turned off.
– Open the hoods of both vehicles and locate the car batteries. Identify the positive and negative terminals on both batteries.
– Connect the jumper cables to the positive (+) terminal of the dead battery, then connect the other end of the cable to the positive terminal of the working battery. Repeat this process for the negative (-) terminals.
Remember to follow proper safety procedures when jump starting a vehicle to prevent any future issues. Make sure to keep your Jeep Compass well-maintained by regularly checking the battery, engine, and other essential parts of the vehicle. By taking preventative measures, you can avoid potential issues and ensure your vehicle runs smoothly for years to come.
Frequently Asked Questions
Q: Why might you need to jump start your 2018 Jeep Compass?
A: Your battery may have died due to extended periods of inactivity or extreme weather conditions.
Q: What tools do you need to jump start your Jeep Compass?
A: You will need a set of jumper cables and another running vehicle with a fully charged battery.
Q: What steps should you follow to jump start your Jeep Compass safely?
A: Make sure both vehicles are turned off, connect the red jumper cable to the positive terminals of both batteries, connect the black jumper cable to the negative terminal of the working battery and a metal surface on the dead battery car, start the working vehicle and let it run for a few minutes, then try to start the dead vehicle.
Q: What should you do if your Jeep Compass still won’t start after attempting a jump start?
A: You may need to replace the battery or have it inspected by a professional mechanic to determine if there is a deeper issue causing the battery drain.
Q: How can you prevent future issues with your Jeep Compass’ battery?
A: Regularly check the condition of your battery and keep it clean and free of corrosion, drive your vehicle regularly to keep the battery charged, and consider investing in a battery charger or maintainer for added peace of mind.
Closing Remarks
As you embark on your journey with your newly jump-started 2018 Jeep Compass, may the road ahead be smooth and filled with exciting adventures. Remember, with a little knowledge and the right tools, you can overcome any obstacle that comes your way. Here’s to a year filled with endless possibilities and daring escapades. Happy driving!